Craftertech Solutions is a leading provider of steel structural designing, analysis, and detailing services. With extensive experience in the engineering industry, our team of experts specializes in delivering innovative and efficient solutions for a wide range of projects, from residential buildings to large-scale industrial facilities. Our integrated workflow covers every phase of structural steel engineering—from conceptual framing and load calculation to detailed shop drawings and anchor bolt plans.
Precision Steel Structural Design, Analysis & BIM Detailing Services
Craftertech Solutions Global Private Limited delivers end-to-end, code-compliant steel structural designing, finite element analysis (FEA), advanced BIM modeling, and shop fabrication detailing. We bridge the gap between architectural intent and shop-floor fabrication, ensuring structural integrity, cost efficiency, and zero-clash erection for industrial, commercial, and infrastructure projects across India, North America, Europe, and the Middle East.
Whether you need Pre-Engineered Building (PEB) design, heavy industrial steel framework analysis, or steel connection detailing, our mechanical and structural engineering experts leverage cutting-edge computational tools to optimize steel consumption without compromising safety.
At a Glance: Craftertech Advantage
-
Global Compliance: AISC, IS, Eurocode, BS, and AS/NZS codes.
-
BIM & Erection Ready: LOD 400 models with Advanced Softwares.
-
Material Optimization: Save up to 15–22% structural steel tonnage via optimized FEA.
-
Industry Verticals We Serve
-
Industrial & Manufacturing: Heavy factories, chemical plant structures, warehouses, logistics hubs, and processing units.
-
Energy & Infrastructure: Substation structures, pipe racks, solar module mounting structures (MMS), and conveyor systems.
-
Commercial Real Estate: Multi-story steel buildings, mezzanines, sports arenas, canopies, and architectural steel features.
-
Modular & Prefabricated Units: Containerized structures, Light Gauge Steel Framing (LGSF), and modular skids.
Global Structural Engineering Capabilities. Uncompromised Code Compliance. Zero Field Rework.
Craftertech Solutions Global Private Limited partners with Tier-1 EPC contractors, commercial developers, and steel fabricators across India, North America, Europe, Israel, and the Middle East. We provide high-precision structural steel design, advanced finite element analysis (FEA), connection design, and millimetre-accurate BIM detailing.
By bridging local Indian engineering efficiency with stringent international codes, we function as an extended technical wing for your engineering department—reducing material tonnage, shortening fabrication cycles, and eliminating constructability conflicts before steel hits the shop floor.
End-to-End Structural Steel Engineering Services
1
Structural Steel Design & Finite Element Analysis (FEA)
We perform rigorous static, dynamic, wind, and seismic structural analysis to ensure maximum structural integrity and optimized steel tonnage.
-
3D Structural Modeling & Frame Analysis: Complex spatial structures, high-rise frameworks, and heavy industrial bays using STAAD.Pro, ETABS, and SAP2000.
-
PEB (Pre-Engineered Building) Engineering: Custom primary frame design, tapered member optimization, secondary structural framing (purlins/girts), and standing seam roofing systems.
-
Seismic & Wind Load Calculations: Advanced dynamic response spectrum analysis compliant with site-specific geographic and climatic conditions.
2
Complex Steel Connection Design & Calculations
Connections represent the critical failure point in structural systems. We engineer robust, economical connections that streamline shop fabrication and site erection.
-
Moment, Shear, and Axial Connections: Calculated down to bolt-torque and weld-volume efficiency using IDEA Statica and custom verification spreadsheets.
-
High-Seismic & Heavy Industrial Connections: Fully restrained (FR) and partially restrained (PR) connections, base plates, crane gantry girder connections, and heavy truss nodes.
-
Complete Calculation Packages: Standardized, clear calculation booklets ready for local authority approval and Third-Party Independent Peer Review.
3
BIM Detailing & Shop Drawings
Our certified detailers transform structural models into fabrication-ready datasets that drive CNC machinery directly.
-
3D BIM Coordination & Clash Detection: Multi-disciplinary clash resolution between steel frameworks, MEP ducting, civil foundations, and architectural envelopes.
-
Fabricator Shop & Erection Drawings: Detailed single-part drawings, assembly sheets, anchor bolt layouts, and clear erection mark diagrams.
-
Digital Fabrication Outputs: Automated generation of NC/DSTV files for automated CNC drilling/cutting, BOM/BOL (Bill of Materials/Lading), and wrap/plate development layouts.
At Craftertech Solutions, we are committed to delivering exceptional service and exceeding our clients' expectations. Our dedication to quality, innovation, and customer satisfaction has made us the preferred choice for steel structural designing, analysis, and detailing services.
Multi-Standard Compliance for Global Execution
Our engineering teams maintain deep operational mastery over regional building codes, ensuring your submittals pass local peer reviews on the first pass:
Table: Structural steel design codes and international engineering standards supported by Craftertech Solutions.
Designed for Chief Engineers, Built for Fabricators
"We don't just draft lines; we engineer constructability. Every bolt location, weld callout, and clearance check is performed with shop-floor execution and site safety in mind."
-
Integrated QA/QC Protocols: Every drawing undergoes a mandatory three-tier review (Checker $\rightarrow$ Lead Engineer $\rightarrow$ Principal Structural Auditor) to maintain a zero-clash threshold.
-
Accelerated Tendering Support: Rapid preliminary steel tonnage estimation and member sizing to support your bid preparation phase.
-
Seamless Project Integration: We adapt to your internal layering standards, drawing sheets, modeling guidelines, and CDE (Common Data Environment) workflows (B360, Trimble Connect, ProjectWise).
We Also Provide
Tensile Structure Designing
Tensile structures can be used to create a wide range of designs, from simple canopies and awnings to complex geometric shapes and structures. Our offered Tensile Membrane Structure Designing Service provides engineering that work best and combines ideas with workshop concepts.
Frequently Asked Questions
What structural steel design codes does Craftertech Solutions support?
Craftertech Solutions supports major international structural engineering standards, including AISC 360/341 (USA), IS 800:2007 (India), Eurocode 3 (Europe/UK), and BS 5950. Our engineers calculate loads according to regional wind and seismic mandates, including IS 875, ASCE 7, and local Middle Eastern/Israeli provisions.
How does Craftertech ensure accuracy in BIM steel detailing?
We enforce a strict 3-tier Quality Control (QC) framework. Models are cross-checked using automated clash-detection software alongside manual reviews by senior checkers. We generate direct NC/DSTV data straight from validated 3D models, removing manual transcription errors for CNC fabrication equipment.
Can Craftertech handle Pre-Engineered Building (PEB) design and detailing?
Yes. Craftertech provides end-to-end PEB engineering—from preliminary frame geometry optimization and tapered built-up member design to detailed cold-formed secondary framing (Z & C purlins), sheeting details, and anchor bolt plans.
How do we engage Craftertech for outsourced steel structural detailing?
You can engage us on a project-by-project basis, a dedicated resource model (FTE), or a fixed-price contract. Simply provide your Architectural CAD/BIM files, Structural Design Criteria (SDC), or preliminary calculation sheets, and our team will issue a scoped technical proposal within 24 to 48 hours.
How do you charge for steel design and detailing services?
We offer flexible engagement models tailored to project scope: Per-Ton Rate: Ideal for shop detailing and fabrication drawings with fixed scopes. Lump-Sum Project Cost: Best for end-to-end design, analysis, and detailing packages. Dedicated Hourly/Monthly Retainer: Suited for engineering firms requiring ongoing structural support.
What inputs are required to start a steel structural design project?
To start a project, we typically require architectural drawings/GA plans, site geography details (for wind and seismic zone identification), design load requirements (dead, live, dynamic loads), and any specific material/section availability preferences.
![20231007153446_[fpdl.in]_october-2018-building-construction-skyscrapers-dubai_231208-7619_](https://static.wixstatic.com/media/9434f9_eab39703fea944c086918f83b887689f~mv2.jpg/v1/fill/w_287,h_323,al_c,q_80,usm_0.66_1.00_0.01,enc_avif,quality_auto/20231007153446_%5Bfpdl_in%5D_october-2018-building-construction-skyscrapers-dubai_231208-7619_.jpg)
Methods and Technologies as Services
3D Modelling and Visualization
Building Information Modelling (BIM)
